2000W 12v 100a battery charger for lifepo4 / gel / agm/ lead acid batteries

Brief description :

12v 100a battery charger is automatic smart charger for lead acid batteries / lifepo4 batteries / gel /agm batteries. The led displayer show voltage and current , the current can be adjusted as your requirement from 1amp to 100amp. high efficiency and multi protection , safety and durable. It can use on all high power electric tools, electric vehicle, electric car , electric cruise car ,electric forklift ev products. Easy to use and convenience to take. It is good for prolonging your batteries' lives !!

Feature :

1. Aluminium case , light weight

2. Input voltage ; AC 100 V ~240 V 50 / 60 HZ

3. Max wattage : 2000W

4. Charge mode : 3 stage CC CV float mode for lead acid battery charger , 2 stage cc cv for lifepo4 / lithium battery charger

5. Charging : High saturation and efficiency

6. Input plug(power cords) : EU US UK AUS Italy Plugs etc ( can be Customized)

7. Output Connector : DC jack, XLR, JST, Cigar Lighter, Alligator Clips, EZGO d plug , 2 crowfoot plug etc

The 3-stage mode charging for lead acid / gel / agm battery charger :

First stage ( constant current ) : The charger will supply constant current for the battery

Second stage ( constant voltage ) : The voltage will be rising under the first stage, when it reach constant voltage value, it will turn into the second stage. The current will be slowly smaller until it reduce to floating value,the CV stage will end.

Third stage ( Floating charging ) : When the current is approaching the value of transition, the charger will cut down to the given current gradually, that means the battery power is full and indicator light turn to green. At this moment, the battery can be stopped charging or keep on trickle current charging for half an hour.

The 2000w 12v 100a battery charger specification :

Note: Cut-off point for Li battery is 5% of CC, and it can be setted between 3-10%.

Advantage :

1. full automatic transition of cc cv and float/ cut-off (cc cv 2 or 3 stage charger)

2. Precise limit of voltage& current, guarantee fully charged and avoid over charger

3. Protections : short circuit, over voltage, over-temperature, reverse polarity protections, Dc output isolated from AC input

4. High Efficient : > 85% PFC :0.96 Eco-friendly

5. Two led indicators LED1 Red ( power on ), LED 2 Red/Green ( charging/full )

6. Safety and high quality, Advantage high frequency switching mode power supply technology

7. LED displayer show current and voltage, the current can be adjusted as your requirement

Charging Procedure :

1. First output power charger wire ends are connected to the battery anode and cathode , the charge indicator turns green, the connection is correct, otherwise the charge in question, please check the actual situation.
2. Then city power plug to socket , the indicator is red, charger will be into the charging state .
3. When the indicator light turns to green, the battery is charged to 95% , If you want to reach 100% , keep charging for 1 to 2 hours before end of charge.
4. When fully charged, disconnect the city power first, then disconnect the battery cable.

Package & Delivery

1. Package : one piece one neutral box , 2 pcs/ carton, can be customized

2. Delivery : 5 to 7 working days , big order according to actual quantity

3. Delivery port : Guangzhou port

4. Payment term : T/T or Western Union

5. Delivery way : by sea / by air / by express or as your requirement

For more information about 12v 100a battery charger or other items battery charger 12v 24v 26v 48v 60v 72v, welcome to contact us !

                    Guangzhou Donglong Electronic Co., Ltd was found in 2009 ; We own high-level developing engineers and manufacturing staffs and have ability to handle large orders ; We are specialized in manufacturing battery chargers which can be largely applied for all EV, E-motorcarycles, E-sweepers and E-forklifts, we adopt high-rate switching mode technology. Our chargers are high quality, stable , smart, portable and efficient ( up to 99% ). They have aluminum case , elegant appearance, light weight and small size .

Our Company has supplied high quality, high stable and reliable chargers for North America, Europe and Asia such as CA, ME,USA,GB,IT,SW,JP,KR and so on, all of our products had passed CE, RoSH." Best quality is bright future " this proverb warn us every time and we promise our quality from factory, production, excellent material quality, novel style and accurate assembling , We use strong innovation and development capabilities to bulid brand so as to become the leading enterprises in the green power industry both in China and world market.